Honda HRN216VYA User Manual

10-5
HRN216 CAMSHAFT/CRANKSHAFT/ PISTON/CYLINDER
INSTALLATION
Install the camshaft and lifters before installing the cylinder (P. 10-8).
During reassembly, recheck the valve clearance (page 3-15
).
6 x 14 mm BOLT (4)
CYLINDER HEAD
COVER
24 N•m (18 ft-lb)
8 x 40 mm BOLT (2)
24 N•m (18 ft-lb)
8 x 25 mm BOLT (2)
CYLINDER HEAD
INSTALLATION: P. 10-6
Do not reuse if bent or
damaged.

Honda HRN216VYA Specifications

General

Engine	Honda GCV170
Cutting Width	21 inches
Deck Material	Steel
Starting System	Recoil
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Cutting Height Adjustment	6 positions
Drive System	Variable Speed