Honeywell ECS Series User Manual

Model IFP-2100/ECS Installation Manual LS10143-001SK-E
6-7
6.3.1.2 Auto Reset ECS MIC Triggered Event
If the Timer is selected, the event will automatically reset after being active for the programmed time. If Event
Disabled is selected, the event will not be allowed to be activate from an LOC Station. Selecting Never will
require an emergency system reset to be performed to reset the event.
Select Never/Timer/Event Disabled, Range from 1-240 min
6.3.2 Edit Voice Commands
When a voice output group is selected to be activated by a zone, the cadence pattern choice does not apply. For
voice output groups, one of six system wide voice commands will activate instead of the cadence pattern.
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 6 for Network Programming Menu.
3. Select 7 for Voice Options.
4. Choose Site.
5. Select 2 for Edit Voice Commands.
6. Select the command you wish to edit:
Table 6-2 Auto Reset ECS MIC Triggered Event Timer Menu
ECS Timer Option
Control Lockout Immediate/Timer/Never
Auto Reset ECS MIC Triggered Event Never/Timer/Event Disabled
Auto Reset ECS Event 1 Never/Timer/Event Disabled
Auto Reset ECS Event 2 Never/Timer/Event Disabled
Auto Reset ECS Event 3 Never/Timer/Event Disabled
Auto Reset ECS Event 4 Never/Timer/Event Disabled
Auto Reset ECS Event 5 Never/Timer/Event Disabled
Auto Reset ECS Event 6 Never/Timer/Event Disabled
Auto Reset ECS Event 7 Never/Timer/Event Disabled
Auto Reset ECS Event 8 Never/Timer/Event Disabled
Table 6-3 Voice Command Mapping
System Event
Fire Alarm
Fire System Aux 1
Fire System Aux 2
Fire Zone Aux 1
Fire Zone Aux 2
Fire Pre Alarm
Emergency Communication 1
Emergency Communication 2
Emergency Communication 3
Emergency Communication 4
Emergency Communication 5
Emergency Communication 6

Honeywell ECS Series Specifications

General

Brand	Honeywell
Model	ECS Series
Category	Conference System
Language	English