Honeywell ECS Series User Manual

Model IFP-2100/ECS Installation Manual LS10143-001SK-E
9-3
9.2.1.3 Changing Module Options
Each module has a unique set of options that specifically applies to the functionality of the module being edited.
8. Use the left and right arrow keys to move between available options.
9. Option settings are edited by pressing the up or down arrow key or using the keypad for numerical entry.
9.2.2 Adding a Module
To add a new hardware module to the system, follow these steps:
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Select 7 for Panel Programming.
2. Press 1 to enter module menu.
3. Press 2 to add a module.
4. From the next screen, select the number that corresponds to the type of module you are adding from the
<New Module Type> screen.
The screen will display “Adding module [#]...” for a few moments. You will be returned to the <New Mod-
ule Type> screen where you can add additional modules if desired.
You must save changes when you exit the Panel Programming or the new module will not be added.
Note: If you Add a Module that has not been physically connected, the panel will go into trouble after it reinitial-
izes (when you exit the Panel Programming). When the new module is attached, the trouble will correct
itself automatically.
9.2.3 Deleting a Module
To delete a module, follow these steps:
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Select 7 for Panel Programming.
2. Press 1 to enter module menu.
3. Press 3 to delete a module.
4. Select the module to be deleted.
5. A warning screen will display. If you want to proceed with deleting the module, select Yes. To cancel, select
No.
9.2.4 View Module List
To view a list of all modules, follow these steps:
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Select 7 for Panel Programming.
2. Press 1 to enter module menu.
3. Press 4 to view list. Use the up or down arrow key to scroll though list.

Honeywell ECS Series Specifications

General

Brand	Honeywell
Model	ECS Series
Category	Conference System
Language	English