Honeywell ECS Series User Manual

LS10143-001SK-E Programming
9-16
Select Type
UNUSED
B NOTIF NOTIF OUTPUT User also has Supervised/
Unsupervised option
CONTROL CIRCUIT
A NOTIF Same as B NOTIF
AUX_PWR CONSTANT Constant auxiliary power.
AUX RESET Resettable auxiliary power.
AUX DOOR Door holder auxiliary power.
AUX SYNC
Select Type
B SWITCH MANUAL PULL Refer to comments column of
Table 9-4 for description of these options.
Latch or Non-latching feature only appears for
WATERFLOW, FIRE SUPERVISORY, FIRE
TAMPER, ZONE AUX1, ZONE AUX2, SYSTEM
AUX1, SYSTEM AUX2, ECS INPUT, ECS
TAMPER, and ECS SUPERVISORY.
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
ECS INPUT User also has ECS Event Number 1-8 option for
ECS INPUT.
Only available when a ECS-VCM or ECS-
NVCM is installed in the system.
ECS TAMPER
ECS SUPERVISORY
A SWITCH Same as B SWITCH
B DETECT 2-WIRE SMOKE Used for Class B, 2-wire detectors.
4-WIRE SMOKE Used for Class B, 4-wire detectors.
CO 4-WIRE DET Used for Class B, 4-wire CO detectors.
CO 4-WIRE SUP DET Latching or Non-latching used for Class B, 4-
wire CO Supervisory detectors
A DETECT 2-WIRE SMOKE Used for Class A, 2-wire detectors.
4-WIRE SMOKE Used for Class A, 4-wire detectors.
CO 4-WIRE DET Used for Class A, 4-wire CO detectors.
CO 4-WIRE SUP DET Latching or Non-latching used for Class A, 4-
wire CO Supervisory detectors
Select Zone/Group
Group or Zone selection will appear depending
on the type selected.
Edit Name See Appendix B
Table 9-6: Menu choices for Internal/External Power Module
Choices Type Selections
Function
Selections for
each Type
Comments

Honeywell ECS Series Specifications

General

Brand	Honeywell
Model	ECS Series
Category	Conference System
Language	English