EasyManuals Logo
Home>HP>Switch>5120 series

HP 5120 series User Manual

HP 5120 series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
93
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the IRF virtual device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to the root directory of the storage medium on the master.
ftp> put newest.bin
ftp> bye
NOTE:
You can take the same steps to up
g
rade confi
g
uration file with FTP. When up
g
radin
g
the confi
g
uration
file with FTP, put the new file under the root directory of the storage medium.
After you finish upgrading the Boot ROM program through FTP, you must execute the bootrom update
command to upgrade the Boot ROM.
3. Upgrade the IRF virtual device
# Copy the boot file newest.bin to the root directory of the storage medium on a slave switch (with the
member ID 2).
<Sysname> copy newest.bin slot2#flash:/
# Specify newest.bin as the main boot file to be used at the next startup for all the member devices.
<Sysname> boot-loader file newest.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the IRF virtual device and the boot file is updated at the system reboot.
<Sysname> reboot
CAUTION:
The boot file used for the next startup must be saved under the root directory of the storage medium. You
can copy or move a file to the root directory of the storage medium. For more information about the
boot-loader command, see
the
Fundamentals Command Reference.
Displaying and maintaining FTP
To do… Use the command…
Remarks
Display the configuration of the FTP client
display ftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the configuration of the FTP server
display ftp-server [ | { begin | exclude |
include } regular-expression ]
Available in any view

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5120 series and is the answer not in the manual?

HP 5120 series Specifications

General IconGeneral
BrandHP
Model5120 series
CategorySwitch
LanguageEnglish

Related product manuals