HP 5120 series User Manual

31
To do… Use the command… Remarks
Specify the none authentication
mode
authentication-mode none
Required
By default, you can log in to the
device through the console port
without authentication, and have
user privilege level 3 after login.
Configure common settings for
AUX user interface view
—
Optional
See "Configuring common settings
for c
onsole login (optional)."
After the configuration, the next time you log in to the device through the console port, you are prompted
to press enter. A prompt such as <HP> appears after you press Enter.
Configuring password authentication for console login
NOTE:
This feature is not supported in FIPS mode.
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration requirements."
Configuration procedure
Follow these steps to configure password authentication for console login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter AUX user interface view
user-interface aux first-number
[ last-number ]
—
Configure the authentication mode
as local password authentication
authentication-mode password
Required
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
Set the local password
set authentication password
[ hash ] { cipher | simple }
password
Required
By default, no local password is
set.
Configure common settings for
AUX user interface view
—
Optional
See "Configuring common settings
for console login (optional)."
When you log in to the device through the console port after the configuration, you are prompted to enter
a login password. A prompt such as <HP> appears after you input the password and press Enter.

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English