HP 5120 series User Manual

100
Format Descri
p
tion Len
g
th Exam
p
le
drive:/[path]/file-
name
Specifies a file in the specified
storage medium on the device.
drive represents the storage
medium name. The storage
medium on the master is usually
flash; the storage medium on a
slave is usually slotX#flash, where
X represents the member ID of the
slave, for example slot2#flash. To
view the correspondence between
a device and its member ID, use
the display irf command.
1 to 135
characters
flash:/test/a.cfg indicates a file
named a.cfg in the test folder in the
root directory of the flash memory
on the master.
To read and write the a.cfg file in
the root directory of the flash on a
slave (with the member ID 2), input
slot2#flash:/a.cfg for the filename.
Directory operations
You can create or remove a directory, display the current working directory, the specified directory, file
information, and so on.
Displaying directory information
To do… Use the command… Remarks
Display directory or file
information
dir [ /all ] [ file-url ]
Required
Available in user view
Displaying the current working directory
To do… Use the command… Remarks
Display the current working
directory
pwd
Required
Available in user view
Changing the current working directory
To do… Use the command… Remarks
Change the current working
directory
cd { directory | .. | / }
Required
Available in user view
Creating a directory
To do… Use the command… Remarks
Create a directory mkdir directory
Required
Available in user view

HP 5120 series Specifications

General

Brand	HP
Model	5120 series
Category	Switch
Language	English