Drives
Hardware and Software Guide 5–3
Optical Drive
Inserting an Optical Disc
To protect your CD or DVD during this procedure, handle the
disc by the edges, rather than by the flat surfaces.
To insert an optical disc:
1. Be sure the notebook is turned on.
2. To release the media tray, press the release button 1 on the
drive bezel.
3. Pull the media tray outward until it is fully extended 2.
4. Position the disc over the media tray, label-side up.
5. Gently press downward near the center of the disc until the
disc snaps into place 3.
6. Close the media tray 4.
To Next Page
Loading...
Need help?
General