Modem and Networking
Hardware and Software Guide 10–9
7. In the Phone and Modem Options dialog box, select the
Modems tab.
8. Select your modem, and then select Properties.
9. Clear the check box for Wait for dial tone before
dialing.
10. Select OK > OK.
Preinstalled Communication Software
To access preinstalled modem software for terminal emulation
and data transfer:
1. Select Start > All Programs > Accessories >
Communications.
2. Select a fax or terminal emulation program or a connection
wizard.
For information about establishing an Internet connection for
your modem, refer to the “Connect to the Internet” section in the
printed Getting Started guide included with your notebook.
For more modem information, including instructions for using
AT commands and dial modifiers, refer to the supplementary
guides included with your notebook. These guides, which are
provided only in English, include Modem Command Guidelines
(Advanced Users Only) and a guide to the AT commands
supported by your modem.
To Next Page
Loading...
Need help?
General