13–6 Hardware and Software Guide
Setup Utility
Advanced Features
This guide describes the Setup utility features recommended for
all users. For more information about the Setup utility features
recommended for advanced users only, refer to the Help and
Support Center by selecting Start > Help and Support.
The Setup utility features available for advanced users include:
■ A hard drive self-test.
■ A Network Service Boot.
The “<F12> to boot from LAN” message that is displayed in
the lower-left corner of the screen each time the notebook is
turned on, restarted, or restored from hibernation is the
prompt for a Network Service Boot to a PreBoot eXecution
Environment (PXE) server.
■ Settings for boot order preferences.
The “Press <ESC> to change boot order” message that is
displayed in the lower-left corner of the screen each time the
notebook is turned on, restarted, or restored from hibernation
is the prompt to change the boot order.
■ Settings for enabling and disabling optional WLAN and
Bluetooth devices.
If an optional wireless device is disabled in the Setup utility,
the device cannot be controlled by using the wireless button
or the Wireless Assistant utility. For more information
about the wireless button and Wireless Assistant, refer
to Chapter 11, “Wireless (Select Models Only).”
To Next Page
Loading...
Need help?
General