18
ONIX Control Head
ONIX CONTROL HEAD
POWER KEY
Press the POWER key to power on the control head.
Press and hold the power key to power off.
During operation, press the POWER key to open a
menu with start-up functions, such as Sonar Source
and Radar Transmit. The menu options depend on the
accessories attached to the system.
The backlight and touch screen can also be adjusted
from this menu.
ENTER KEY
Press the ENTER key start a command or turn on a
setting. The ENTER key also opens the Info menu and
the Cursor menu.
EXIT KEY
Press the EXIT key once to close a menu, close a
dialog box, turn off an alarm, or exit Cursor mode.
Press and hold the EXIT key to close all menus at
once.
ONIX Key Functions
The functions for each key are described here. To apply the key functions, see each section of this manual. You can also use the touch
screen to replace key functions. See ONIX Cross Touch for more information.
To Next Page
Loading...
Need help?
General
