75
Introduction to Navigation
NAVIGATION MENU OVERVIEW
C
ross Touch allows you to access the navigation features from the touch screen or the keypad. The Navigation X-Press Menu is
o
pened using the touch screen. The same menus are also offered by pressing the MARK key, GO TO key, and ENTER key. The Cursor
m
enu is also available by using the touch screen.
Navigation X-Press Menu
The Navigation X-Press Menu allows you to open the following navigation menus: Mark, Go To, and Info. The Navigation X-Press
Menu can also be opened in the Radar View and Sonar View when navigation is enabled.
Open the Navigation X-Press Menu
1. With a Chart View displayed on-screen, tap Chart in the status bar.
2. Select Mark, Go To, or Info.
3. Select an action from the submenu. For example, to mark a waypoint, select Mark > Waypoint.
This section is an overview of the menus available for navigation. The availability of menu options is determined by
the navigation mode. To apply these functions, see Waypoints, Routes, Tracks, and Search.
Navigation
X-Press
Menu
Using the Touch Screen to Open the Navigation X-Press Menu
close
To Next Page
Loading...
Need help?
General
