76
Introduction to Navigation
Mark Menu
The Mark menu marks a waypoint at the selected location. You can also create a saved route
or mark the vessel position. See Waypoints and Routes for more information about using this
m
enu.
Open the Mark Menu
1. Press the MARK key.
OR
Select Mark from the Navigation X-Press Menu.
Go To Menu
The Go To menu starts navigation to the item you select. See Routes for more information about
using this menu.
Open the Go To Menu
1. Press the GO TO key.
OR
Select Go To from the Navigation X-Press Menu.
Mark Menu Options
Waypoint
Select Waypoint to save a waypoint at the vessel position. If the cursor is active, the waypoint
is saved at the cursor position.
Route Select Route to create a saved route. See Routes for more information.
Lat/Long Use the on-screen keyboard to manually enter a latitude/longitude position for a waypoint.
Vessel Position
(with active cursor)
Select Vessel Position to save a waypoint at the vessel position even though the cursor is
active.
To Next Page
Loading...
Need help?
General
