JR XP6102 User Manual

53XP6102 - Helicopter Manual
MODEL NAME ENTRY
5.4
The XP6102 allows an 8-digit name to be
input for each of the ten models available.
The current model will be displayed in the
Normal display.
Accessing the Model Name Entry Function
1. While pressing the Down and Select
keys, switch the transmitter to the On
(upper) position to enter the Model
Setup mode.
2. press the Up or Down key until
MODEL NAME is displayed.
2. Press either the Up or Down key to
select the first character for the model
name.
4. Press the Select key to advance the
character selection to the next character.
5. Repeat this procedure until all eight
characters have been selected.
6. Press the Down key to access the
MODEL SEL function.
7. Press the Up key to access the MODEL
TYPE Selection function.
8. Press the Down and Select keys
simultaneously to exit the MODEL
NAME function.
[MODEL NAME]
#5 HELI SPCM
VENTURE
Model name being
programmed
Model Number and Type
Select character
Reset selected
character to blank
space
Go to Model Type menu
Go to Model Select menu
Change selected
character

JR XP6102 Specifications

General

Brand	JR
Model	XP6102
Category	Remote Control
Language	English