68 XP6102 - Helicopter Manual
6.7
THROTTLE CUT SWITCH
This is the function to assign Throttle Cut
switch to the push button located on
upper right front of the transmitter. The
Throttle Cut function is designed to return
the throttle trim to the lowest position
instantly and keep this position while the
button is pressed. This feature is used to
“cut” or stop the engine without changing
the position of digital throttle trim.
Accessing the Throttle Cut Function
1. Place the transmitter power switch in
the On position.
2. Access the Function mode. To do so,
press the Down and Select keys
simultaneously. Press either the Up or
Down key until THRO CUT appears in
the upper portion of the LCD screen.
3. Use the (+) and (-) keys to change the
value of the Throttle cut function.
Note: Pressing the Clear key will Inhibit
the Throttle Cut, turning it off until it
has been reactivated.
4. Access the TRAVEL ADJ mixing
function by pressing the Down key.
5. Access the THROTTLE HOLD function
by pressing the Up key.
6. Exit the THRO CUT function by
pressing the Down and Select keys
simultaneously.
To Next Page
Loading...
Need help?
General
