Keithley 2614B Reference Manual

Section
7: TSP command reference Series 2600B System SourceMeter® Instrument
Reference Manual
7-78 2600BS-901-01 Rev. B / May 2013
Usage
func = display.smuX.limit.func
display.smuX.limit.func = func
func
One of the following values:
0 or display.LIMIT_IV: Displays the primary limit setting
1 or display.LIMIT_P: Displays the power limit setting
X
Source-measure unit (SMU) channel (for example, display.smua.limit.func
applies to SMU channel A)
Details
Selects the displayed limit function: primary (IV) or power (P).
SMU A and SMU B can be set for different display functions.
Example
display.smua.limit.func = display.LIMIT_P
Specifies the power limit value is
displayed for SMU Channel A.
Also see
display.smuX.measure.func (on page 7-78)
display.smuX.measure.func
This attribute specifies the type of measurement that is being displayed.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes
Instrument reset
Recall setup
Saved setup 1 (display.MEASURE_DCVOLTS)
Usage
func = display.smuX.measure.func
display.smuX.measure.func = func
func
One of the following values:
• 0 or display.MEASURE_DCAMPS: Selects current measurement function
• 1 or display.MEASURE_DCVOLTS: Selects volts measurement function
• 2 or display.MEASURE_OHMS: Selects ohms measurement function
•
3
or
display.MEASURE_WATTS
: Selects power measurement function
X
Source-measure unit (SMU) channel (for example,
display.smua.measure.func
applies to SMU channel A)
Details
Selects the displayed measurement function: Amperes, volts, ohms, or watts.
SMU A and SMU B can be set for different measurement functions.
Example
display.smua.measure.func = display.MEASURE_DCAMPS
Selects the current measure function
for SMU A.

Keithley 2614B Specifications

General

Brand	Keithley
Model	2614B
Category	Measuring Instruments
Language	English