7: TSP command reference Series 2600B System SourceMeter® Instrument
7-350 2600BS-901-01 Rev. B / May 2013
trigger.timer[N].wait()
This function waits for a trigger.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
triggered = trigger.timer[N].wait(timeout)
Trigger detection indication
Trigger timer number (1 to 8)
Maximum amount of time in seconds to wait for the trigger
Details
If one or more trigger events were detected since the last time trigger.timer[N].wait() or
trigger.timer[N].clear() was called, this function returns immediately.
After waiting for a trigger with this function, the event detector is automatically reset and rearmed. This is true
regardless of the number of events detected.
Example
triggered = trigger.timer[3].wait(10)
print(triggered)
Waits up to 10 seconds for a trigger on
timer 3.
If false is returned, no trigger was
detected during the 10-second timeout.
If
is returned, a trigger was detected.
Also see
trigger.timer[N].clear() (on page 7-344)
trigger.wait()
This function waits for a command interface trigger event.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
triggered = trigger.wait(timeout)
true: A trigger was detected during the timeout period
false
: No triggers were detected during the timeout period
Maximum amount of time in seconds to wait for the trigger
To Next Page
Loading...
Need help?
General
