RECEIVING
SWITCHING POWER
ON/OFF
To switch
ON
your transceiver, turn the PWRNOL
control clockwise and set it at the
11
o'clock position.
Various indicators, including a receive frequency, appear
on the display. Due to the automatic squelch feature,
no
sound will be heard from the speaker until you receive a
call.
Use the same control to adjust the volume more
precisely while receiving your first call, or press
[MONI]
and adjust the PWRNOL control to set the background
noise to a comfortable level. Pressing
[MONI]
always
allows you to listen to activity
on
the selected frequency
as long
as
this key is held down.
To switch
OFF the transceiver, turn the PWRNOL
control counterclockwise until it clicks at the OFF
position.
SQUELCH
THRESHOLD
LEVEL
The receiver squelch
is
automatically controlled by the
transceiver's microcomputer based on the measured
noise level. However, you can override the
microcomputer setting, if you wish.
1 Turn the
ENC/SQL
control to select a frequency that
is not busy.
2 Press [F],
[MONI].
• The current squelch threshold level appears.
• The default
is
"5".
c
APO
3 Turn the
ENC/SQL
control to select the desired level
(0 to 9).
•
0:
Selects lowest threshold level (squelch open).
•
9:
Selects highest threshold level.
4 Press any key other than
[LAMP]
or
[MONI].
13
To Next Page
Loading...
Need help?
General
