RECALLING MEMORY CHANNELS
• Using the ENC/SQL Control
1 Press [MR].
• The memory channel used last
is
recalled.
•
If
all
memory channels
are
empty, your
transceiver beeps and Memory Recall
is
not
selected.
2 Turn the
ENC/SOL control
to
select the desired
memory channel.
• Clockwise : Increases the channel number.
• Counterclockwise : Decreases the channel
number.
• Empty memory channels cannot be recalled.
• Using the Keypad
1 Press [MR].
• The memory channel used last
is
recalled.
2 Enter a 2-digit number
(00
to 39)
to
select the
desired memory channel.
• Empty memory channels cannot
be
recalled.
Note: When a split memory channel is recalled,
"+
"
appears on the display
to
the left
of
the receive frequency.
Press {REV]
to
display the transmit fre•quency.
MEMORY
~
VFO TRANSFERS
Transferring the contents of a memory channel
or
the
Call channel to the VFO can be useful if you wish
to
search for other stations
or
a clear frequency near the
selected memory channel or Call channel frequency.
This
is
a quick operation that will
be
used frequently,
especially if you enjoy exploring the band.
1 Press
[MR]
to select Memory Recall, or [CALL] to
select the Call channel.
2 Recall the desired memory channel using the
ENC/SQL control.
• This step is not necessary if the Call channel was
selected.
3 Press
[F], [VFO].
• The complete contents of the memory channel or
the Call channel are copied to the
VFO.
• A transmit
freque1ncy
from a split memory channel
or split Call channel
is
not transferred to the VFO.
23
To Next Page
Loading...
Need help?
General
