SELECTING FREQUENCY STEP SIZE
Choosing the correct step size when operating is
essential
in
order
to
select your exact operating
frequency with the
ENC/SQL control. The best step size
is the largest step that will still allow you to use the
ENC/SQL control to select all frequencies
on
which you
plan to operate. Using the best step size reduces the
time required
to
select new frequencies with the
ENC/SOL control; operating becomes easier.
Default (kHz)
Version
TH-22
Canada
5
U.S.A.
Australia
Europe . 12.5
General
1 Press [VFO]
to
select the VFO.
2 Press [F], [T/CT].
TH-42
25
25
• The current frequency step appears.
14
J
3 Turn the ENC/SQL control to switch between
available frequency steps.
• As you turn the
ENC/SQL control clockwise or
counterclockwise, the following selections appear:
5 kHz
""
)o
10kHz
"'
"' 15 kHz
t
25 kHz
'(
» 12.5 kHz
..-
»
20
kHz
4 Press any key other than [LAMP)
or
[MONI].
• The new step size is stored, and the previous
display is restored.
Note:
The
step size can be set separately for the
VFO,
Call
channel,
and
memory channels.
To Next Page
Loading...
Need help?
General
