UNLOCKING ENC/SQL CONTROL
If
you
only want
to
lock the keys but not the ENC/SQL
control when Key
lock
is
activated, that
is
possible too.
1 Press
[CALL]+ POWER ON to select Menu Set-up.
2 Turn the ENC/SQL control
to
select Menu
No.
06.
• The current status of
ENC/SQL control lock
appears.
• The default
is
"OFF".
APO
nrr
c
.,
,.,.
L
11.
[If,
s
3 Press [CALL]
to
select
"ON"
or "OFF".
•
OFF:
Locks ENC/SQL control with keys.
• ON : Does not lock
ENC/SQL control with keys.
4 Press any key other than [CALL], [LAMP],
or
[MONI]
to
exit Menu Set-up.
18
BEEP
TONE
ON/OFF
The transceiver beeps each time you press a key
on
the
transceiver with the exception of
[MONI],
[LAMP), and
[PTT]. Pressing [PTT] generates a beep
if
your
transmit frequency is outside the transmit band. Beep
volume can be varied
by
turning the
PWRNOL
control.
If you prefer, you can cancel the beep for silent
operation.
1 Press
[CALL]+
POWER ON to enter Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 04.
• The current beep status appears.
• The default is "ON".
APO
rl
n,_,
&..1•·1
u 1
s
3 Press [CALL] to select "OFF" or
"ON".
• OFF: Disables Keypad Beep.
• ON : Enables Keypad Beep.
4 Press any key other than [CALL], [LAMP],
or
[MONI]
to exit Menu Set-up.
Note: When Tone Alert
is
switched ON while the Beep
function
is
OFF,
an
audible alarm does
not
sound when a
signal
is
received.
To Next Page
Loading...
Need help?
General
