INHIBITING THE TRANSMITTER
The transmit function can
be
disabled to prevent
unauthorized individuals from transmitting, or to eliminate
the risk
of
yourself accidentally transmitting.
1 Press
[CALL]+
POWER ON
to
select Menu Set-up.
2 Turn the ENC/SQL control
to
select Menu No.
05.
• The current Transmit Inhibit status appears.
• The default is "OFF".
APO
I
sriCC
c
!.I'
'
C/5
s
3 Press [CALL]
to
select "OFF" or
"ON".
•
OFF:
Enables transmitter ("TX.S" disappears).
•
ON
: Inhibits transmitter ("TX.S" appears).
""''
4 Press any key other than [CALL], [LAMP],
or
[MONI]
to exit Menu Set-up.
If
[PTT]
is
pressed while Transmit Inhibit
is
ON, your
transceiver beeps
and
will not transmit. The PTT switch
on any microphone configured for remote control with
this
transceiver also will
be
disabled.
On
TH-228TH-42E versions, the 1750
Hz
tone cannot
be
transmitted while Transmit Inhibit
is
activated.
20
BUSY FREQUENCY LOCK-OUT
A method of inhibiting the transmitter when the current
receive frequency
is
busy.
is provided. This feature can
help to eliminate "doubling" (simultaneous transmissions)
with other stations.
1 Press
[CALL]+
POWER ON
to
enter Menu Set-up.
2 Turn the ENC/SQL control
to
select Menu
No.
14.
• The current Busy Frequency Lock-out status
appears.
• The default is
"OFF".
-·--
I I
lri.J.
Ot.
!.I I I
APO
s
3 Press [CALL] to select "OFF" or
"ON".
• OFF: Enables transmitter on a busy frequency.
•
ON
: Inhibits transmitter on a busy frequency.
4 Press any key other than [CALL), [LAMP],
or
[MONI]
to exit Menu Set-up.
To Next Page
Loading...
Need help?
General
