RECEIVING
1 Tune to the prearranged frequency.
2 Press
[F], [1)
to
switch ON Page.
•
"PAG"
appears.
You are ready
to
receive a call addressed with your
station code or a group code. If no signal is received for
more than 2 seconds after a Page has opened the
squelch, the squelch then closes.
• Receiving a Call with your Station Code
When a signal is received encoded with your individual
code, the squelch opens and you hear
an
alert tone
from the speaker.
In
addition, the display shows "OP"
and the calling station's code.
APO
s
Press [PTT] while
"PAG"
is blinking to respond to the
calling party.
• Receiving a
Call
with a Group Code
When a signal
is
received encoded with the correct
group code, the squelch opens and you hear an alert
tone from the speaker.
In
addition, the diisplay shows
the received group code and in which
mE1mory
(1
to 6)
that group code has been stored.
---
3
p'-.
,_
,_
-·
_,
__
,
APO
s
Press [PTT] while
"PAG"
is blinking to respond
to
the
calling party.
Note:
~
"En
appears on the display
if
your tranSC!liver fails to
receive the Page code correctly.
~
The
microphone is inhibited while the Page code is
transmitted.
~
It's advisatJie to turn OFF Battery Saver when you use
Page.
45
To Next Page
Loading...
Need help?
General
