7
Using the Utility Mode
7-12
7.2 Drum Dehumidify
During times of high humidity or when there are sudden rapid changes in
humidity (especially when you are using a heater in winter), condensation
can form on the surface of the PC Drum, resulting in blotchy copies. In
such instances, use the “Drum Dehumidify” function to dry the surface of
the PC Drum.
✎
Tip
A copy or print cycle can be run while in the Drum Dehumidify mode.
The copier automatically leaves the Drum Dehumidify mode after the
lapse of a given period of time.
Running the Drum Dehumidify Sequence
1
Call the Utility Mode to the Display.
❍
Calling the Utility Mode to the Display (p.7-1)
2
Making sure that “U--” appears on
the Display, enter “2” from the Key
Pad.
3
Press the [START] key.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
Need help?
General
