Konica Minolta 7115 - Useful Functions; Auto Resetting; Auto Panel Reset

Before Making Copies
3
3-17
3.6 Useful Functions
Auto Resetting
Press the [AUTO RESET] key to return all modes and functions (zoom
ratio, number of copies, etc.) to their defaults. (All selected settings are
canceled.)
✎
Tip
The [AUTO RESET] key comes in handy for canceling all selected
settings at one time.
To avoid accidentally using settings from the previous copy job, press
the [AUTO RESET] key to return all functions and settings to their
defaults before making any setting for your current job.
Auto Panel Reset
Without pressing the [AUTO RESET] key, the copier automatically resets
all functions and settings to their defaults 1 min after a copy cycle has
been completed or a key operated.
✎
Tip
The length of time before the copier automatically resets itself can be
set between 1 min and 5 min, in addition to 30 seconds. The Auto
Panel Reset function can even be disabled.
For more details, refer to “User’s Choice” (p.7-2, p.7-8).
Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM