7
Using the Utility Mode
7-2
7.1 User’s Choice
The functions set and established on the control panel when the copier is
turned ON or the [AUTO RESET] key is pressed are called the default
settings. These settings can be modified by selecting User’s Choice.
Refer to the table given below for the code and default value of each
function.
Code Name Setting Setting Details
Default
Value
1 Mixed Orig. 0 Mixed Orig. enabled
1 Mixed Orig. disabled
2
2 Paper Priority 0 A3L
1B4L
2A4L
3B5L
4A5L
5FLS L
6A4C
2
7B5C
8A5C
10 11×17L
11 11×14L
12 Legal L
13 Letter L
14 5-1/2×8-1/2L
15 Letter C
16 5-1/2×8-1/2C
20 1st Tray
21 2nd Tray
22 3rd Tray *1
23 4th Tray *1
24 5th Tray *1
25 Multiple Bypass Tray
3 Copy Priority 0 APS
2
1AMS
2 Manual
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
Need help?
General
