Konica Minolta 7115 User Manual

6
Advanced Copying
6-10
6.3 Erasing Part of Original Image (Erase)
The copier erases a margin of a set width along the edges or erases any
other unwanted images. One of the following four different erase functions
can be selected:
What is Left Erase?
➜
A given width is erased from the left
edge of the copy.
What is Upper Erase?
➜
A given width is erased from the top
edge of the copy.
What is Frame Erase?
➜
A given width along all four edges is
erased.
What is Center Erase?
➜
A given width is erased down the
center.
✎
Note
This setting is available only when Dual Page is selected.
(p.6-3)
Original Copy
Original Copy
Original Copy
Original Copies
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM

Konica Minolta 7115 Specifications

General

Brand	Konica Minolta
Model	7115
Category	Copier
Language	English

Summary

Introduction

Safety Information

Detailed instructions on operation and maintenance for user safety and preventing equipment problems.

Precautions

Installation Precautions

Requirements for installing the copier safely and preventing malfunctions, including site and power source specifications.

Operation Precautions

Guidelines for proper operation, including environmental requirements and user safety measures.

Before Making Copies

Components and Their Functions

Description of various optional components and their functions.

Parts Names and Their Functions

Identification and description of the main parts of the copier and its optional units.

Control Panel

Turning ON and OFF and the Initial Mode

Loading Originals

Two Ways of Loading the Original

Loading Originals in the Automatic Document Feeder

Place the Original on the Original Glass

Making Copies

Copying

Basic procedure for making copies, including positioning originals and setting controls.

Selecting the Paper

Specifying the Zoom Ratio

Adjusting the Image Density

Advanced Copying

Making 1-Sided Copies

Setting combinations for 1-sided, 2in1, and 4in1 copies.

Output Copies (Sort and Group)

Error Displays and Other Indicators

Major Error Displays and Remedial Actions

Table of error displays, their possible causes, and recommended actions.

When the Add Paper Indicator Lights up

Procedure for adding paper when the indicator lights up, causing the copy cycle to stop.

When the Add Toner Indicator Lights up

Instructions for replacing the toner bottle when the indicator lights up.

When the Paper Misfeed Indicator Lights

Actions to take when a paper misfeed occurs, including identifying locations and clearing misfeeds.

Troubleshooting Tips

When This Type of Copy is Produced

Solutions for copy quality issues like images being too light or dark, or blurry.

When the Copier is not Operating Correctly

Guidance for common operational issues like no display or unresponsive keys.