Making Copies
5
5-11
5.4 Specifying the Zoom Ratio
By specifying a zoom ratio, the copy can be enlarged or reduced.
Types of Zoom Ratio
Setting
Description
AMS This setting automatically selects the most appropriate zoom
ratio based on the size of the original loaded and the paper size
selected for use. The copier must be equipped with an
Automatic Document Feeder.
Fixed ratios The following optimum zoom ratios are available for making
copies from commonly used original sizes to standard paper
sizes.
•50%
•70% (A3
Ö
A4, B4
Ö
B5)
•81% (B4
Ö
A4, B5
Ö
A5)
• 115% (B4
Ö
A3, B5
Ö
A4)
• 141% (A4
Ö
A3, B5
Ö
B4)
•200%
Ratios set using Zoom
([ ][ ]) key
Touching the [ ] or [ ] key increases or decreases the zoom
ratio in 1% increments. The ratio can range from 50% to 200%.
Full Size This setting makes a copy the same size as the original
(100%).
X/Y Zoom This setting allows the zoom ratio to be set independently for X
(horizontal) and Y (vertical) directions.
The ratios can be set directly from the Key Pad, in the range
between 50% and 100%.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
Need help?
General
