3
Before Making Copies
3-20
Account Number
If account numbers have been programmed, use of the copier can be
limited to certain people or to a specified number of copies for each
account.
✎
Note
If account numbers have been
programmed, the copier cannot be
used unless the specific account
number is entered first.
<Account number entry screen>
To use this function, set “Copy
Track” of “Administrator Mode”
under the Utility mode. (p.7-20)
To enter an account number
1
Enter the 3-digit account number
from the Key Pad.
?
Do you want to correct the
access number just entered?
➜
Press the [CLEAR] key and then
enter the correct account
number.
2
Press the [ID] key.
3
The account number entry screen changes to the default setting
indication, indicating that the copier is ready to make copies. Run the
desired copy cycle.
4
When the copy cycle is completed, press the [ID] key a second time.
Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
Need help?
General
