Konica Minolta bizhub 4700P User Manual

User's Guide
- 114 -
Use
To
Resource Save
On
Off
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives
a print job that requires more memory than is available.
Notes:
• Off is the factory default setting. Off sets the printer to
retain downloads only until memory is needed. Downloads
are deleted in order to process print jobs.
• On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then
Memory Full 38
appears on the printer
display, but downloads are not deleted.
Finishing menu
Use
To
Sides (Duplex)
1 sided
2 sided
Specify whether two-sided (duplex) printing is set as the default for all print jobs.
Notes:
• “1 sided” is the factory default setting.
• You can set two-sided printing from the software program.
For Windows users:
1. Click File >Print.
2. Click Properties, Preferences, Options, or Setup.
For Macintosh users:
1. Choose File >Print.
2. Adjust the settings from the print dialog and pop-up menus.
Duplex Binding
Long Edge
Short Edge
Define the way two-sided pages are bound and printed.
Notes:
• Long Edge is the factory default setting. Long Edge binds pages along their
long edge (left edge for portrait and top edge for landscape).
• Short Edge binds pages along their short edge (top edge for portrait and
left edge for landscape).
Copies
1–999
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional