Konica Minolta bizhub 4700P User Manual

User's Guide
- 15 -
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan
to install any options, then leave enough room for them also. It is important to:
• Set up the printer near a properly grounded and easily accessible electrical outlet.
• Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN
Technical Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
- Clean, dry, and free of dust.
- Away from stray staples and paper clips.
- Away from the direct airflow of air conditioners, heaters, or ventilators.
- Free from direct sunlight and humidity extremes.
• Observe the recommended temperatures and avoid fluctuations.
Ambient temperature
15.6 to 32.2°C (60 to 90°F)
Storage temperature
-20 to 40°C (-4 to 104°F)

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional