Konica Minolta bizhub 4700P User Manual

User's Guide
- 187 -
Action
Yes
No
Step 1
Measure the distance between the
defects.
Check for a distance between
the defects that equals:
- 97 mm (3.82 in.)
- 47 mm (1.85 in.)
- 38 mm (1.5 in.)
Is the distance between defects
equal to one of the listed
measurements?
Go to step 2.
1. Check if the distance between
the defects equal to 80 mm
(3.15 in.)
2. Take note of the distance, and
then contact technical support.
Step 2
Replace the imaging unit, and then
resend the print job.
Do the repeating defects still
appear?
Contact technical support.
The problem is solved.
Print is too dark

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional