Konica Minolta bizhub 4700P User Manual

User's Guide
- 34 -
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the
area shown while actively printing. Loss of data or a malfunction can occur.
Use the
To
1
USB port
Attach an optional wireless network adapter.
2
USB printer port Connect the printer to a computer.
3
Ethernet port Connect the printer to an Ethernet network.
4
Power switch
Turn on or turn off the printer.
5
Printer power cord socket
Connect the printer to an electrical outlet.
6
Security slot
Attach a lock that will secure the printer in place.
Accessing the controller board
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional