User's Guide
- 120 -
PCL Emul menu
Resident
Download
Flash
All
Specify the set of fonts used by the Font Name menu.
Notes:
• “Resident” is the factory default setting. “Resident” shows the factory
default set of fonts downloaded in the RAM.
• “Download” shows all the fonts downloaded in the RAM.
• “Flash” shows all fonts resident in that option. The optional flash
memory card must be properly formatted and cannot be read/write-,
write-, or password-protected.
• “All” shows all fonts available to any option.
R0 Courier
Identify a specific font and the option where it is stored.
Note: R0 Courier is the factory default setting. R0 Courier shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, and D for Download.
10U PC-8
12U PC-850
Specify the symbol set for each font name.
Notes:
• 10U PC-8 is the US default setting. 12U PC-850 is the Non-US default
setting.
• A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific program, such as math symbols for scientific
text. Only the supported symbol sets are shown.
• Symbol set values are displayed as: “[Font ID][Font Name]” (e.g. “10U
PC-8”).
Pitch
0.08–100
Specify the font pitch for scalable monospaced fonts.
Notes:
• 10 is the factory default setting.
• Pitch refers to the number of fixed-space characters per inch (cpi).
• Pitch can be increased or decreased in 0.01-cpi increments.
• For nonscalable monospaced fonts, the pitch appears on the display
but it cannot be changed.
To Next Page
Loading...
Need help?
General
