Konica Minolta bizhub 4700P User Manual

User's Guide
- 98 -
AppleTalk menu
Note: This menu is available only in printer models connected to a wired network or when an optional
network card is installed.
To access the menu, navigate to any of the following:
• Network/Ports >Standard Network >STD NET SETUP >AppleTalk
Use
To
Activate
Yes
No
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
View Name
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
View Address
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Set Zone
[list of zones available on the
network]
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional