User's Guide
- 76 -
550-sheet tray
229 x 356 mm (9 x 14 in.)
This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software
application.
2
Universal is supported only in the standard tray if the paper size is at least 105 x 148 mm (4.1 x 5.8 in.). Universal is
supported only in the optional 250- or 550-sheet tray if the paper size is at least 148 x 210 mm (5.8 x 8.3 in.).
Universal is only supported in duplex mode if the width is at least 210 mm (8.3 in.) and length is at least 279 mm
(11 in.). The smallest supported Universal size is only supported in the multipurpose feeder.
3
Only long edge feeding is non-supported.
Supported paper types and weights
The standard tray supports 60–90-g/m
2
(16–24-lb) paper weights. The optional tray supports 60–120-
g/m
2
(16–32-lb) paper weights. The multipurpose feeder supports 60–163-g/m
2
(16–43-lb) paper weights.
Plain paper
Card stock X
X
Transparencies
X
Paper labels
Bond