Konica Minolta bizhub 4700P User Manual

User's Guide
- 94 -
Network Card menu
To access the menu, navigate to either of the following:
• Network/Ports >Standard Network >STD NET SETUP >Network Card
Use
To
View Card Status
Connected
Disconnected
View the connection status of the network card.
View Card Speed
View the speed of an active network card.
Network Address
UAA
LAA
View the network addresses.
Job Timeout
0–255 seconds
Set the amount of time it takes for a network print job to be canceled.
Notes:
• 90 seconds is the factory default setting.
• A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page
Off
On
Set the Banner Page.
Note: Off is the factory default setting.
TCP/IP menu
To access the menu, navigate to any of the following:
• Network/Ports >Standard Network >STD NET SETUP >TCP/IP
Note: This menu is available only in network printers or printers connected to print servers.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional