Konica Minolta bizhub 4700P User Manual

User's Guide
- 198 -
Horizontal voids appear on prints
Action
Yes
No
Step 1
1. Make sure your software program is using a correct fill pattern.
2. Resend the print job.
Do horizontal voids appear on prints?
Go to step 2. The problem
is solved.
Step 2
1. Load the specified tray or feeder with a recommended type of paper.
2. Resend the print job.
Do horizontal voids appear on prints?
Go to step 3.
The problem
is solved.
Step 3
1. Redistribute the toner in the imaging unit.
a. Remove the toner cartridge, and then the imaging unit.
b. Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
c. Reinstall the imaging unit, and then the cartridge.
2. Resend the print job.
Do horizontal voids appear on prints?
Go to step 4.
The problem
is solved.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional