Konica Minolta bizhub 4700P User Manual

User's Guide
- 90 -
Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
• Inches is the US default setting.
• Millimeters is the Non-US default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US default setting. You can increase the width in
0.01-inch increments.
• 216 mm is the Non-US default setting. You can increase the
width in 1-mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US default setting. You can increase the height
in 0.01-inch increments.
• 356 mm is the Non-US default setting. You can increase the
height in 1-mm increments.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional