Konica Minolta bizhub 4700P User Manual

User's Guide
- 173 -
Print job takes longer than expected
Action
Yes
No
Step 1
Change the environmental settings of the printer.
1. From the printer control panel, navigate to:
Settings >General Settings
2. Select Eco-Mode or Quiet Mode, and then select Off.
Note: Disabling Eco-Mode or Quiet Mode may increase the consumption
of energy or supplies, or both.
Did the job print?
The problem is
solved.
Go to step 2.
Step 2
Reduce the number and size of fonts, the number and complexity of images,
and the number of pages in the print job, and then resend the job
Did the job print?
The problem is
solved.
Go to step 3.
Step 3
1. Remove held jobs stored in the printer memory.
2. Resend the print job.
Did the job print?
The problem is
solved.
Go to step 4.
Step 4
1. Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings >General Settings >Print Recovery >Page Protect >Off
2. Resend the print job.
Did the job print?
The problem is
solved.
Go to step 5.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional