Konica Minolta bizhub 4700P User Manual

User's Guide
- 138 -
Understanding jam messages and locations
When a jam occurs, a message indicating the jam location and information to clear the jam appears on
the printer display. Open the doors, covers, and trays indicated on the display to remove the jam.
Notes:
• When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial
prints to the standard bin after a jammed page has been cleared. Check your printed output stack for
discarded pages.
• When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto
setting does not guarantee that the page will print.
Area
Printer control panel message
What to do
1
Standard bin
[x]-page jam, clear standard bin. [20y.xx]
Remove the jammed paper.
2
Rear door [x]-page jam, open rear door. [20y.xx] Open the rear door, and then remove
the jammed paper.
3
Tray 1
[x]-page jam, remove tray 1 to clear
duplex. [23y.xx]
Pull tray 1 completely out, then push the
front duplex flap down, and then remove
the jammed paper.
Note: You may need to open the rear
door to clear some 23y.xx paper jams.
4
Tray [x]
[x]-page jam, remove tray [x]. [24y.xx]
Pull the indicated tray out, and then
remove the jammed paper.
5
Multipurpose
feeder
[x]-page jam, clear manual
feeder. [250.xx]
Remove all paper from the multipurpose
feeder, and then remove the jammed
paper.
6
Front door
[x]-page jam, open front door. [20y.xx]
Open the front door, then remove the
toner cartridge, imaging unit, and
jammed paper.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional