Konica Minolta bizhub 4700P User Manual

User's Guide
- 160 -
Note: If the message appears again, then contact your system support person.
Solving printer problems
• Basic printer problems
• Option problems
• Paper feed problems
Basic printer problems
The printer is not responding
Action
Yes
No
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Go to step 2.
Turn on the printer.
Step 2
Check if the printer is in Sleep mode or
Hibernate mode.
Is the printer in Sleep mode or Hibernate
mode?
Press the Sleep button to wake the
printer from Sleep mode or Hibernate
mode.
Go to step 3.
Step 3
Check if one end of the power cord is
plugged into the printer and the other to a
properly grounded electrical outlet.
Is the power cord plugged into the printer
and a properly grounded electrical outlet?
Go to step 4.
Plug one end of the power cord
into the printer and the other to
a properly grounded electrical
outlet.
Step 4
Check other electrical equipment plugged
into the electrical outlet.
Does other electrical equipment work?
Unplug the other electrical
equipment, and then turn on the
printer. If the printer does not work,
then reconnect the other electrical
equipment.
Go to step 5.

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional