Konica Minolta bizhub 4700P User Manual

User's Guide
- 178 -
Print quality problems
Characters have jagged or uneven edges
Action Yes No
Step 1
1. Print a font sample list to check if the fonts you are using are
supported by the printer.
a. From the printer control panel, navigate to:
Menus >Reports >Print Fonts
b. Select PCL Fonts or PostScript Fonts.
2. Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2. Select a font that is
supported by the printer.
Step 2
Check if the fonts installed on the computer are supported by the
printer.
Are the fonts installed on the computer supported by the printer?
The problem is
solved.
Contact technical support.
Clipped pages or images

Konica Minolta bizhub 4700P Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 150, 000 pages
Maximum Paper Input Capacity	2, 300 sheets
Standard Memory	512 MB
Processor	800 MHz
Duplex Printing	Yes
Connectivity	USB, Ethernet
PDL	PCL 6, PostScript 3
Supported Operating Systems	Windows, Mac, Linux
Hard Drive	Optional