2-9
SPECIALTOOLS – CHASSIS
FIG PART NO DESCRIPTION
1 151.12.017.000 Gear puller
2 584.29.086.000 Pressing tool for swing arm bearing
3 584.29.089.000 Chassis tool holder
4 584.29.091.000 Press-in tool for
bearing seat / rear wheel bearing
5 584.29.092.000
Knock-out tool for bearing seat
6 600.03.022.000 Center stand
7 600.10.013.000 Sleeve for pressing tool for swim arm bearing
8 600.29.018.000 Internal gear puller 28 mm
9 600.29.020.000 Chain rivet tool
10 600.29.055.000 Center stand lock
11 600.29.055.100 Floor jack attachment
12 600.29.056.000 Anvil dolly (for 584.29.086.000)
13 600.29.057.000 Pliers for Öttiker clamps
14 600.29.057.100 Pliers for spring-loaded band-type clamp
15 625.29.055.000 Assembly stand 950 Supermoto/990 Super Duke
To Next Page
Loading...
Need help?
General
