GREASING AND SERVICE TABLE 27
7GREASING ANDSERV ICE TABLE
7.1Important maintenance work to be carried out by an authorized KTM workshop.
K05N K15A K45A T1A
Engine Change the engine oil and oil filter, and clean the oil screen. ( P. 67) • •
Check and adjust valve clearance. • •
Check engine mounting screws for tightness. • • •
Replace spark plug. •
Clean spark plug connectors and check for tightness. •
Carburetor Clean and adjust carburetor. •
Check carburetor connection boots for cracks and leakage. •
Check vent hoses for damage and routing without sharp bends. • •
Check idle. • •
Check carburetor components. •
Change the fuel filter. •
Attachments Check that all operating elements for smooth operation. • •
Check the cooling system for leakage. • • •
Check the coolant level and antifreeze. ( P. 63) • • •
Check the exhaust system for leakage and looseness. • • •
Check Bowden cables for damage, smooth operation and routing without
sharp bends.
• •
Check the fluid level of the hydraulic clutch. ( P. 41) • •
Clean the air filter. ( P. 65) • • •
Check that the electrical equipment is functioning properly. • •
Check cables for damage and routing without sharp bends. • •
Clean the tank breather hoses, checking for damage and routing without
sharp bends.
• •
Check the headlamp setting. •
Treat electric contacts with contact spray. •
Brakes Check the front brake linings. ( P. 43) • • •
Check the rear brake linings. ( P. 48) • • •
Check the front brake disc. ( P. 41) • • •
Check the rear brake disc. ( P. 46) • • •
Check the front brake fluid level. ( P. 42) • • •
Check the rear brake fluid level. ( P. 47) • • •
Change brake fluid. •
Check brake lines for damage and leakage. • • •
Check the free play of the hand brake lever. ( P. 42) • •
Check the free play of the foot brake lever. ( P. 46) • •
Check brake system function. • • •
Check screws and guide bolts of brake system for tightness. •
Chassis Check shock absorber and fork for leakage and functioning. • •
Clean dust boots of fork legs. ( P. 35) •
Bleed fork legs. ( P. 35) • •
Check swingarm bearing. •
Check the frame and link fork for cracks. •
Check play of steering head bearing. ( P. 36) •
Check all screws to see if they are tight. • • •
Wheels Check the spoke tension. ( P. 54) •
Check rim run-out. • •
Check the tire condition. ( P. 53) •
Checking the tire air pressure. ( P. 53) •
Check rear sprocket / engine sprocket for wear. ( P. 40) •
Check the chain tension. ( P. 40) • •
To Next Page
Loading...
Need help?
General
