EasyManua.ls Logo

KTM 690 User Manual

KTM 690
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
MAINTENANCE WORK ON CHASSIS AND ENGINE 71
8.90Topping up engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
600060-11
Remove the screw cap on the clutch cover and fill up with engine oil.
Engine oil (SAE 10W/60) ( P. 96)
Engine oil (SAE 20W/60) ( P. 97)
Mount and tighten screw cap .
Danger
Danger of poisoningExhaust gases are poisonous and can result in uncon-
sciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in a closed space.
Start the engine and check that it is oil-tight.

Table of Contents

Questions and Answers:

KTM 690 Specifications

General IconGeneral
Engine TypeSingle-cylinder, 4-stroke
Transmission6-speed
StarterElectric
Fuel SystemElectronic fuel injection
CoolingLiquid-cooled
Rear SuspensionWP monoshock
Front BrakeSingle 320 mm disc, 4-piston caliper
Rear BrakeBrembo single-piston caliper, 240 mm disc
Fuel Tank Capacity13.5 liters
FrameChromium-Molybdenum steel trellis
Rear Wheel17"

Summary

IMPORTANT NOTES

Grades of risks

Defines risk levels: Danger, Warning, Note, and their implications for safety.

Use definition

Defines the intended use and regulations for KTM sport motorcycles.

OPERATING ELEMENTS

TIPS AND HINTS ON PUTTING INTO OPERATION

Advice on first use

Provides crucial safety advice and pre-ride checks for new users.

Running in the engine

Details the recommended speeds for the engine run-in phase.

RIDING INSTRUCTIONS

Checks before putting into operation

Lists essential pre-ride checks for safety and proper function.

GREASING AND SERVICE TABLE

Important checks and maintenance work to be carried out by the rider.

Outlines routine checks and maintenance tasks for the owner.

MAINTENANCE WORK ON CHASSIS AND ENGINE

Changing engine oil and oil filter, cleaning oil screen

Covers the process for oil change and oil screen cleaning.

TROUBLESHOOTING

Engine turns but does not start.

Lists causes and measures for engine starting failures.

Engine overheats.

Covers causes and solutions for engine overheating.

TECHNICAL DATA - ENGINE

TECHNICAL DATA - CHASSIS

WIRING DIAGRAM

SUBSTANCES

Related product manuals