MAINTENANCE WORK ON FRAME AND ENGINE 110
400694-01
– Strike each spoke briefly using a screwdriver blade.
Info
The frequency of the sound is a function of the spoke length and spoke diame-
ter.
If spokes of the same length and diameter vibrate with a different tone, this is
an indication that the spoke tensions differ.
You should hear a high note.
» If the spoke tension differs:
–
Correct the spoke tension. x
9.41Removing the underride guard x
– Jack up the vehicle on the center stand. ( p. 65)
100577-10
– Swing the side stand downward.
– Remove all four screws and take off underride guard .
To Next Page
Loading...
Need help?
General
