GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION 45
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
– Before your first trip, read the entire operating instructions carefully.
– Get to know the controls.
– Adjust the basic setting of the clutch lever. ( p. 152)
– Adjust the free travel of hand brake lever. ( p. 89)
–
Adjust the basic position of foot brake lever. x
– Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and
in a standing position to get a better feeling for the vehicle.
– Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
– Run the engine in.
6.2Running in the engine
– Do not exceed the specified engine speed and load during the running-in period.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi) 6,500 rpm
After the first: 1,000 km (621.4 mi) 9,500 rpm
– Avoid full-throttle operation!
To Next Page
Loading...
Need help?
General
