CONTROLS 29
5.19Setting the clock
Condition
The motorcycle is standing.
400893-12
– Switch on the ignition by turning the black ignition key to the position ON .
– Press the MODE button repeatedly until the ODO mode is active.
– Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
– Press the MODE button to set the hour.
– Press the SET button to set the minute.
– Keep the MODE button and the SET button pressed simultaneously.
The time is set.
5.20Combination instrument - display ODO
400839-01
In the ODO display mode, the total distance traveled is shown in kilometers or miles.
Info
This value is retained, even if the battery is disconnected and/or the fuse blows.
To Next Page
Loading...
Need help?
General
