MAINTENANCE WORK ON FRAME AND ENGINE 146
» If the coolant level does not meet specifications:
Coolant loss: > 0.50 l (> 0.53 qt.)
–
Check the cooling system for leaks. x
Info
Do not start up the motorcycle!
–
Fill/bleed the cooling system. x ( p. 147)
– Mount the radiator cap.
– Install the front side cover. ( p. 124)
9.71Draining the coolant x
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
– Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
Condition
The engine is cold.
– Jack up the vehicle on the center stand. ( p. 65)
–
Remove the left fuel tank. x ( p. 138)
To Next Page
Loading...
Need help?
General
